|Home||» Products||» RO Spares for Industrial||» Filter Vessels|
Being an affluent enterprise in the domain, we are involved in manufacturing, exporting and supplying an advanced range of Pressure Vessels. Our experienced professionals make use of their expertise and quality checked raw material to manufacture these vessels in conformity with set industry norms. Offered vessels are designed to hold gases or liquids at a pressure substantially different from. Further, our clients can get these Pressure Vessels from us in various technical specifications at pocket friendly rates.Pressure vessel features:
Pressure vessels can theoretically be almost any shape, but shapes made of sections of spheres, cylinders, and cones are usually employed. A common design is a cylinder with end caps called heads. Head shapes are frequently either hemispherical or dished (torispherical). More complicated shapes have historically been much harder to analyze for safe operation and are usually far more difficult to construct.
Many pressure vessels are made of steel. To manufacture a cylindrical or spherical pressure vessel, rolled and possibly forged parts would have to be welded together. Some mechanical properties of steel, achieved by rolling or forging, could be adversely affected by welding, unless special precautions are taken. In addition to adequate mechanical strength, current standards dictate the use of steel with a high impact resistance, especially for vessels used in low temperatures. In applications where carbon steel would suffer corrosion, special corrosion resistant material should also be used.
Some pressure vessels are made of composite materials, such as filament wound composite using carbon fibre held in place with a polymer. Due to the very high tensile strength of carbon fibre these vessels can be very light, but are much more difficult to manufacture. The composite material may be wound around a metal liner, forming a composite over wrapped pressure vessel.
Pressure vessels may be lined with various metals, ceramics, or polymers to prevent leaking and protect the structure of the vessel from the contained medium. This liner may also carry a significant portion of the pressure load.
Pressure Vessels may also be constructed from concrete (PCV) or other materials which are weak in tension. Cabling, wrapped around the vessel or within the wall or the vessel itself, provides the necessary tension to resist the internal pressure. A "leakproof steel thin membrane" lines the internal wall of the vessel. Such vessels can be assembled from modular pieces and so have "no inherent size limitations". There is also a high order of redundancy thanks to the large number of individual cables resisting the internal pressure.
Our factory address is:
6/2, 9&10 Sumukh Industrial Estate,
Phase I, Opposite Kiran Industries,
GIDC, Vatva, Ahmedabad 382445, Gujarat State, India